For welding bronze, brass, copper, cast-iron, steel and other dissimilar combinations. Excellent for welding galvanized steel. Venus MIG produces sound repairs and overlays on a wide variety of metals and dissimilar combinations. It also is recommended for use on cast-iron. Excellent results are obtained when joining steel to copper or brass.
Use Venus MIG on pumps, shafts or other bearing surfaces to produce a long-wearing, low friction surface. Deposits are smooth, dense and machinable. Download PDF
Features
High Strength 60,000 psi
Excellent Wearing Surface
Color Match On Bronze
Good Corrosion Resistance
Low Friction Surface
Hardness BHN 75
Applications
Use Venus MIG on pumps, shafts or other bearing surfaces to produce a long-wearing, low friction surface.
Deposits are smooth, dense and machinable.,br />Good for repair on brass impellers
Excellent on brass gears, and dissimilar metals
Recommended Settings
Use Reverse Polarity (DCEP)
.035 Diameter – 15-35 volts, 50-300 amps, 20-35 gas flow (ft3/hr)
Best Practices
Clean brass metal completely.
Preheat 500ºF (260ºC) to 700ºF (371ºC) for sections over 1/4”.
Do not restrain joints while working.
We recommend Gemini Anti-Spatter spray for lasting protection of your contact tip and MIG nozzle (see chemical aids in Abrasives & Metal Working products section).
