Neptune G Gas Brazing AlloySKU: RM-4502
For aluminum-cast or sheet, used in thin flow joints or for build-up and bridging. Neptune G is for the maintenance welder who has difficulty welding aluminum. This low temperature alloy, used with Neptune Flux, controls the temperature while brazing and produces a dense non-porous deposit without danger of melting the base metal.
Neptune G joints are up to three times the strength of the base metal. This universal alloy may be used on sheet or cast aluminum. In addition, Neptune G may be used for thin flow joints and for building up missing sections and to bridge large gaps. Download PDF
Superior Strength 34,000 psi
Fast and Easy To Use
Economical To Use
Excellent Color Match
Excellent For Lap and Butt Joints
Minimum Preparation and Clean-Up
Easy To Build-Up Missing Sections
Sound, Porosity Free Welds
Temperature: 1050°F (565°C)
Clean joint thoroughly.
Apply Neptune Flux as a powder or mix with water to form a paste (available separately).
Heat joint slowly and uniformly.
When flux is molten, apply alloy, heating only enough to see deposit adhere.
Remove flux with warm water.
Neptune AAA Arc Rod
Neptune MIG Wire
Neptune TIG Alloy